Toll Free Number for Free Consultation : 1800 118 994

AES AND ANALOG AUDIO De-EMBEDDING MODULE

AES AND ANALOG AUDIO De-EMBEDDING MODULE

The SDX6811N-A4/ SDX6812N-A4 are AES/EBU de-embedding modules, which de-embed 4 channels (2 pairs) of AES/EBU audio and which support SDI output with equalization and reclocking. The user can choose any channel out of 4 embedded audio groups as audio output or choose the synthesized audio as output signal.

  • De-embedding audio from SD-SDI signal;supporting 2 pairs (4 channels)of AES/EBU outputs
  • De-embedding in 525/625 video standard
  • SDI output with equalization and reclocking
  • One channel analog composite output monitoring
  • 27 available signal sources for each audio output
  • SD-SDI video input auto-detect and input status feedback
  • Supporting 16-bit, 20-bit and 24-bit audio processing
  • Supporting 4-channel audio metering display
  • Generating Tone signal at fixed frequency rate
  • Supporting maximum 1.3 seconds audio delay,invert and mute
  • EDH Monitoring
  • Freeze frame, black field and video loss detection
  • Audio loss and audio overload monitoring
  • SDI Video Input
  • Signal SMPTE259M-C, 270 Mbps, 525/625 SD component
  • Connector BNC (IEC169-8)
  • Impedance 75 ohm
  • Return Loss >18 dB to 270 MHz
  • Equalization Auto equalizing to 30dB@270 Mbps
  • SDI Video Output
  • Signal SMPTE259M-C, 270 Mbps, 525/625 SD component
  • Connector BNC (IEC169-8)
  • Impedance 75 ohm
  • Return Loss >18 dB to 270 MHz
  • Signal Level 800 mV +/-10%
  • DC Offset 0 V +/-0.5 V
  • Rise and Fall Time 400-1500 ps (20% to 80% of amplitude)
  • Overshoot <10% of amplitude
  • Analog Composite Video Output
  • Standard NTSC, PAL or PAL-M
  • Level 1Vp-p +/-3dB
  • Impedance 75 ohm
  • Return Loss >40 dB to 5 MHz
  • DC Offset 0V±0.05 V
  • Frequency Response ±0.2 dB to 5 MHz
  • Differential Gain <1%
  • Differential Phase <1.5°
  • Group Delay +/-10ns to 5 MHZ
  • Analog Audio Output
  • Connector 3-pin
  • Impedance 66 ohm
  • THD+N 0.004% @ 1 kHz 0 dBFS
  • S/N Ratio >107dB
  • Return Loss >25dB, 0.1 to 6MHz
  • Frequency Response 20 Hz - 20 kHz: 0 ±0.15 dB
  • SDIAudio Output
  • Unbalanced AES Output (applicable to SDX6811N-A4 only)
  • Connector BNC(IEC 169-8)
  • Output Level 1.0 V +/-10% (peak to peak)
  • DC offset 0.0V±50.0mV
  • Rise and Fall Time 30 to 44 ns (10% to 90% of amplitude)
  • Impedance 75 ohm
  • Return Loss >25 dB, 0.1 to 6.0 MHz
  • Balanced AES Output (applicable to SDX6812N-A4 only )
  • Connector 3-pin connector (male)
  • Output Level 2.0 to 7.0 V (peak to peak)
  • Jitter +/-20 ns
  • Rise and Fall Time 5 to 30 ns (10% to 90%)
  • Impedance 110 ohm +/- 20% (0.1 to 6 MHz)
  • CMR Ratio >30 dB below output signal (0 to 6 MHz)
  • DARS Input
  • Connector 3-pin connector
  • Sensitivity < 200mv
  • Impedance 110 ohm +/- 20% (0.1 to 6 MHz)
  • Maximum Input Level 10V(peak to peak)
  • CMR Ratio >30 dB below output signal (0 to 6 MHz)
  • Unbalanced DARS Input
  • Connector BNC(IEC 169-8)
  • Sensitivity < 200mv
  • Impedance 75 ohm
  • Return Loss >35 dB, 0.1 to 6.0 MHz
  • Power Consumption
  • Power 3.25W
  • Positive Rail 500 mA
  • Negative Rail 10 mA

SDX6811N-A4 AES and analog audio de-embedding module,two pairs unbalanced AES outputs
SDX6812N-A4 AES and analog audio de-embedding module,two pairs balanced AES outputs